In September 1984, Leyland Bus closed its Charles H Roe vehicle bodywork building business in Leeds.[9] In response, Russell Richardson, a former plant director at Roe, backed by the West Yorkshire Enterprise Board and many redundant former employees, formed Optare in February 1985.[10][11]
The company was created at a very difficult time for the bus and coach industry, with the challenges of privatisation and deregulation meaning very few orders for new vehicles. The first orders came from the still publicly owned West Yorkshire Passenger Transport Executive (WYPTE) and South Yorkshire Passenger Transport Executive (SYPTE). The publicly owned but arms-length company Yorkshire Rider, as successor to the WYPTE bus fleet, also took early vehicles.
When the Roe business closed down, WYPTE had an unfulfilled order for five Leyland Olympian coach-seated double-decker buses in place for its Metro coach operation. These five part finished buses went from Roe to Eastern Coach Works as shells for completion, but subsequently ten more were completed as Optare buses but to the Roe design, the first of which was completed in September 1985, the 17th Optare bus body. Five went to WYPTE, and five to its successor Yorkshire Rider, and a further five standard seated Olympians were also delivered to WYPTE, two as convertible open top buses.[12]
The first Optare designed bodies were fourteen Dennis Dominos for the SYPTE built starting in February 1986. Optare also bodied fifteen Leyland Cubs for the WYPTE. A preserved Cub later visited the Optare plant in 2005.[13]
Starting in August 1986, Optare built fifteen minibuses converted from the Freight Rover Sherpa 350 vans for the WYPTE.[14][15]
Early minibuses
In 1986, Optare introduced the CityPacer minibus.[16] This was based on a heavier version of the Volkswagen LT50 van chassis, to which Optare made modifications prior to bodying.[17] The engine was a six-cylinder 2.4-litre and the body seated 25, with space for a further five standing passengers, a size that met the minibus vogue of the late 1980s. While its competitors looked like the modified vans they were, the CityPacer had attractive styling notable for its large one-piece raked windscreen. London Regional Transport bought 52, and other major operators bought small batches. More than 290 CityPacers were produced in total between 1986 and 1992.
In 1987, the StarRider, based on the Mercedes-Benz 811D chassis, was introduced. This was a heavier chassis with a proven reliability record and had seating for 33 passengers.[18] London Regional Transport took 123 StarRiders and a total of just under 320 were built between 1987 and 1994.
In an attempt to break into the export market, the ColumboRider was subsequently developed, named after the city of Colombo in Sri Lanka, where the first examples were sold.
Expansion
In 1988 the first full size Optare product appeared, the Delta. This was a single-deck bus based on the DAF SB220 chassis. The Delta bodywork featured contemporary styling and was aluminium with a bolted frame licensed from Alusuisse.[21][22] The Delta successfully found a niche in the full-size single deck bus market, which was very limited at that time. Approaching 370 Deltas were built before production ended in 1998.
Dennis had effectively created a new market segment, known as a midibus, with the introduction of the Dennis Dart. Optare soon introduced a competitor, the Vecta, albeit slightly bigger and wider than the Dart at that time, seating 40 in a full-width 2.5 m body. The chassis was the MAN 11.190 and featured a ZF gearbox and full air suspension. The bodywork was a scaled down version of the Delta.
The CityPacer and StarRider were phased out in the years after Optare purchased the design for the MCW Metrorider in July 1989, rebranding it as the Optare MetroRider.[23]
DAF/United Bus
In 1990, Optare joined a group called the United Bus, which included DAF Bus.[24][25]
Having already used a DAF SB220 chassis on the Delta, now as part of United Bus, Optare collaborated with DAF to design the Optare Spectra. It was based on the modified design of the MCW Metrobus purchased by Optare, and combined parts from it and the SB220 to form a new double deck chassis, designated DB250, with Optare bodywork called Spectra.[26] Due to the United bus relationship and joint design, the Spectra was built exclusively on the DB250 chassis. As well as having a striking front end, the Spectra was also recognisable for having no rear window. Introduced in 1990 it was described as a "partly low-floor double-decker".[27] Despite the association with DAF, in 1991 Optare also launched a conventional height midibus on the MAN 11.180 chassis, the Vecta.[28]
Low floor era
Optare began introduction of low-floor buses in the UK in 1995 with the launch of the Optare Excel full size single decker. Although low floor single decker buses had begun to appear as early as 1993. Initially, the Excel used Cummins engines and Allison Transmissions with later examples (Excel 2) having Mercedes-Benz engines available as an option. The introduction of the Excel marked the start of a sustained period of selling integral bus products rather than body on chassis combinations, which continued until the Darwen merger briefly brought East Lancs models to the range.
With modifications of the DB250 chassis to become the DB250LF, in 1997, the Spectra became the first fully low-floor double decker bus on offer in the UK.
Also in 1997 the Solo was launched and became a success for Optare. With a unique design of a front axle forward of the door, it allowed a low-floor layout in a very short bus, and also came equipped with kneeling suspension for even greater access. Its styling and innovation led to a Millennium Products award and the Queen's Award for Innovation.
North American Bus Industries
In 2000, Optare was bought by Hungarian owned North American Bus Industries (NABI). This gave Optare products exposure in the North American market, with an export version of the Solo finding success at several US airports and with Miami-Dade Transit in Florida.
The NABI era saw the introduction of the Alero low-floor minicoach in 2001, filling a gap in the market for a low floor vehicle for use on low intensity services such as demand responsive transport, already covered at the higher capacity by the Solo. In 2004 the new derivatives of Solo were introduced offering a longer variant and also a narrower 'SlimLine' model to further capture the market. Also introduced in 2004 was the first new bus model since the Solo, the Tempo, a full size single decker with another striking design, even when considered in the environment of increasingly stylish competitor products.
On 1 August 2005, NABI found itself in financial difficulties, and speculation about the future of Optare was ended with the announcement that Optare had, once again, been acquired by its management. This change did not affect the further roll out of the new range, leading to the Versa and a radically restyled Solo (the Solo SR), both with a distinctive raised part of the roofline towards the front of the bus.
Darwen purchase and subsequent reverse takeover
On 12 March 2008, Optare was purchased by Jamesstan Investments, an investment company controlled by the Darwen Group's parent company chairman Ron Stanley. Optare initially remained an independent company but by 17 July 2008, a reverse takeover by Darwen Group had been completed. Darwen was the much smaller company, but its Alternative Investment Market listing saw the enlarged Optare gain a stock exchange listing itself as Optare plc. The combined business employed 830 people with a £90 million turnover.[30][31][32] With the respective histories of the two entities, Optare plc could be considered the successor company to the historical British bus manufacturers Charles H Roe (through Optare), founded in Leeds in 1923, and East Lancashire Coachbuilders, (through Darwen), founded in 1934 in Blackburn.
Optare plc
The Optare website was relaunched with a new logo, and with the ex East Lancs Olympus and Esteem models marketed as Optare products. At the time of merger, Optare manufactured buses from three sites, the primary sites being in Leeds (the former Leyland Bus site) and Blackburn (the former East Lancs site), with a further facility in Rotherham.
The merger brought together the single deck and midibus portfolio of Optare and the primarily double deck order book of Darwen.
After the merger, Optare began rationalisation of its bus manufacturing business. In 2009 the production of Esteem single-deck bodywork was ceased, and the manufacturing site at Rotherham was closed.
Ashok Leyland acquisition and name rebrand
In summer 2010, Ashok Leyland (the former Indian subsidiary of British Leyland) bought a 26% stake in Optare.[33] Subsequently, in December 2011 Ashok Leyland increased its stake to 75%.[34]
In 2011, a new fully enclosed 13,000 m2 factory opened in Sherburn-in-Elmet, replacing the Leeds plant.[35] In 2012, the former East Lancs site also closed putting all manufacturing processes under one roof. In June 2015, Optare was delisted from the Alternative Investment Market.[36][37] In October 2017, Ashok Leyland increased its shareholding to 98%, and in 2018 to 99%.
