Mercedes 35 hp — BrandWiki

Mercedes 35 hp

Overview

Mercedes 35 hp

production	1901–1901
model years	1901
aka	Mercedes 35 CV Mercedes 35 PS
designer	Wilhelm Maybach Paul Daimler
body style	Phaeton
chassis	Pressed Steel Ladder Chassis
layout	Front Engine RWD
engine	5918 cc Inline 4 (116x140 mm)
powerout	35 PS @ 950 rpm 57 lbft @ 400 rpm
transmission	4-speed manual transmission + 1 reverse
wheelbase	2345 mm
length	2766 mm
width	1345 mm
height	1300 mm
weight	1200 kg
predecessor	Daimler Phoenix
successor	Mercedes Simplex
manufacturer	Mercedes

The Mercedes 35 hp was a radical early car model designed in 1901 by Wilhelm Maybach and Paul Daimler, for Emil Jellinek. Produced in Stuttgart, Germany, by Daimler-Motoren-Gesellschaft (DMG), it began the Mercedes line of cars (since 1926 re-branded Mercedes-Benz). Its name is derived from the power of the engine, 35 Pferdestärken (26 kW, approximately 35 horsepower).

A significant advancement over the previous generation of automobiles, which were modified stagecoaches, the Mercedes 35 hp is regarded as the first modern car. It was equipped with a powerful petrol engine, it was both wider and larger with a tailored steel chassis, and its centre of mass was near the ground. Originally designed as a racing car, the Mercedes 35 hp was further developed for normal road use.

Historical background

In the 19th century, Wilhelm Maybach's career as an industrial designer had been with Gottlieb Daimler in their Cannstatt workshop (near Stuttgart), at which together they had pioneered the petrol engine production and were responsible for designing and making some of the world's first automobiles. By 1900, Maybach was the chief engineer within the Daimler Motoren Gesellschaft (DMG), which had been an expansion of their previous company that originated from their small workshop. He never got along with the new capitalist board, and later left to join

Development

Jellinek specified revolutionary improvements. Unlike the previous generation of cars, unstable motorized coaches of narrow high bodies which were so prone to overturn, the novel Mercedes should be longer, wider, and of a lower centre of gravity. Also it would have a light steel body and strong chassis, onto which the engine would be firmly fixed near the ground and lowering the car's centre of gravity. 36 of these cars would be delivered, for the large sum of ℳ500,000.

Over the following months of 1900 Jellinek oversaw the process closely, at first through daily telegrams, and subsequently, by travelling personally. Maybach tested the new car for the first time on 22 November and Jellinek received his first delivery on 22 December 1900.

In January 1901, Emil Jellinek's Mercedes team tested six of the new Mercedes 35 hp in the Pau Grand Prix, but the racecar was of a disappointing performance by multiple technical complications and enduring just for few laps. However, in the Nice-La Turbie event of March 1901, it was much different. Jellinek participated through five Mercedes 35 hp and the German driver Wilhelm Werner. The cars dominated the race from start to finish with a record average speed of 51.4 km/h, beating the previous 31.3 km/h and reaching top speeds of 86 km/h. Those results easily outclassed all other competing cars in any capacity. The automotive world was so astonished that Paul Meyan, director of the French Automobile Club, stated: "We have entered the Mercedes era". Eventually, the road car achieved typical speeds of 70 - 75 km/h. The racing version could exceed 85 km/h.

In Stuttgart, DMG mounted two additional back seats on the Mercedes 35 hp, transforming it for a family car. Between March and August 1901, it manufactured two more Mercedes models, the 12/16 HP and the 8/11 HP. The Mercedes was so successful that the production lines of the DMG ran at full capacity. The Mercedes trademark was used on DMG production automobiles from 23 June 1902. It was formally registered on 26 September 1902.

In June 1903, Emil Jellinek changed his own name to Jellinek-Mercedes, stating: "This is probably the first time that a father has taken his daughter's name".

Technical description

Dimensions

The Mercedes 35 hp had a wheelbase of 2,345 mm and a track of 1,400 mm. The total weight was also dramatically reduced to 1200 kg by making the main chassis frame of pressed steel of carefully designed U-shaped cross section.

The relatively light engine—230 kg with 6.6 kg/hp—was mounted over the front axle without any extra subframes, so its centre of gravity was close to the ground.

Running gear

The wooden wheels of the Mercedes 35 hp were non-removable, featuring 12 spokes, steel covers and pneumatic tyres: 910 mm tall, 90 mm wide in front, and 1020 mm tall, 120 mm wide in the rear.

There were two braking systems, one hand operated and the other by foot. The main brake was the hand brake which acted on the rear wheels which had 30 cm drums. The secondary, foot brake, acted on the chain drive's intermediate shaft and was water-cooled.

Both axles were rigid, equipped with semi-elliptic springs. The steering-axles were designed to minimise transmission of road shocks to the driver. The steering column was inclined backwards unlike the vertical shaft on many of its contemporaries.

The engine of the Mercedes 35 hp was at the front of the car driving the rear wheels through a large roller chain. The gearshift was at the driver's right side, featuring a gate change system with four forward speeds and a reverse gear. The drum like compact clutch system was attached to the flywheel. The flywheel consisted of a self-adjustable coil spring made up of wound spring steel. The tension at which the clutch operated was regulated by a conical cam.

Engine

The main bearings were made of magnalium, an aluminium alloy with 5% magnesium. The crankcase was also made of aluminium. The four cylinders, cast in grey iron with fixed heads, gave a total displacement of 5.918 L (116 mm bore, 140 mm stroke), and were arranged in pairs each pair with a single spray-nozzle carburetor. The intake and exhaust valves were no longer opened by cylinder pressure but by two camshafts on the sides of the engine, driven by gears from the flywheel. There were two carburettors, one for each cylinder-pair.

The engine was started by a hand crank aided by the presence of a decompressor. The engine also incorporated a low-voltage magneto with make-and-break spark ignition. This was fitted at Jellinek's demand, replacing the antiquated hot tube system.

Cooling was provided by a pumped water system. Maybach's tubular radiator, patented in 1897, known as a honeycomb radiator, was similar to present-day ones. Its rectangular grille had 8,070 pipes with a square cross section of 6 x to improve airflow, and held 9 L of water. The airflow was assisted by a fan located behind the radiator.

The Mercedes 35 hp engine ran between 300 r/min and 1 000 r/min, its speed controlled by the driver using a lever on the steering wheel. Its peak output was 35 hp at 950 r/min.