FN (Fabrique Nationale de Herstal) is a Belgian company established in 1889 to make arms and ammunition, and from 1901 to 1967 was also a motorcycle manufacturer. FN manufactured one of the world's first four-cylinder motorcycles, was famous for the use of shaft drive in all models from 1903 to 1923, achieved success in sprint and long-distance motorcycle racing, and after 1945, also in motocross.[1]
Early FN motorcycle history
In 1899, FN made shaft- and chain-driven bicycles, and in 1900 experimented with a clip-on engine.
Singles
In December 1901, the first 133 cc single-cylinder motorcycle was built, followed in 1903 by a shaft-driven 188 cc single-cylinder motorcycle. In 1904 a 300 cc single-cylinder motorcycle was produced. The 1907 single-cylinder 244 cc FN motorcycle was the first bike with a multiple-ratio belt drive system, using a patented variable-size engine pulley. In 1909 the two-speed singles had camshafts to open the inlets, instead of the earlier "automatic" valves. Starting from 1912 the singles had a hand lever clutch and foot pedal rear brake.[2]
The FN Four
In 1905, the first 362 cc shaft-drive in-line FN inlet-over-exhaust four-cylinder motorcycle appeared, designed by Paul Kelecom. This was the world's first series-manufactured four-cylinder motorcycle. By 1907 the Four engine had grown to 412 cc. For 1908, the US Export model began manufacture. The Four had a 493 cc engine, and in 1910 that became 498 cc.[2]
After WWI
By the end of World War I, after having to manufacture motorcycles for their occupiers, FN had few parts left, and some suppliers had gone. From 1921 the letter "T" was added to model names. The Type 700T Four had a three-speed gearbox. In 1922 the Type 285TT single had an improved cylinder head. Also the first racer, the Type VII was built.[2]
From 1924, all models had the less expensive chain drive. Most of these were sv and ohv 348 cc and 498 cc singles. The FN M70 "Sahara" 348cc side valve was the most produced FN motorcycle of the interwar period. It was famous for as the name says crossing the Sahara in the 1920s. The FN M90 was as 498cc side valve which was produced in the 1930s. There were also 596 cc ohv machines. The FN M86 is very nice example of a 498cc ohv built in the 1930s. From 1924 FN single-cylinder engines changed from semi unit construction (as seen in the last semi-unit single, the 1922 FN 285TT, in its last year of sale in 1924,) to unit construction engines (as seen in the new-for-1924 M.60). A new chain driven M.50 Four was released with a new Amac carburettor and front brakes. In 1931 a Villiers 198 cc two-stroke FN model appeared. In 1938, the M.12 992 cc air-cooled sv flat twin was built for military use, and the all alloy M.11 was released in 350 cc ohv, 500 cc sv and 600 cc sv models. Then World War II intervened. An M.12 Tri-car was developed and produced for military use.[5]
After WWII
After the War FN built unit construction sv and ohv 249 cc, 344 cc, 444 cc, and 498 cc models, and two-stroke models from 49 cc singles, to 248 cc twins. The two-stroke models used German JLO engines. The semi-unit engined Tri-car was released for civilian commercial use as the Tri-car T-8, with a five-speed gearbox. In 1947 the M.XIII was available in 250 cc ohv, 350 cc ohv, 350 cc sv, 450 cc ohv, and 450 cc sv configurations. The first model used an unusual patented Swiss coil sprung girder front fork and a new rubber rear suspension. In 1948, the Swiss forks were replaced with an adaptation of the rubber rear suspension, which was itself replaced with an improved version. In 1951 the option of telescopic forks was introduced. In 1954 a swing arm frame was introduced. By 1958, the M.XIII toolbox was part of the fuel tank.[6]
There was some success in motocross, with riders like Mingels, Leloup, and R Beaten, but FN withdrew from competition at the end of the 1950s.[1]
Famous designers who worked for FN include Paul Kelecom, Van Hout, Dougal Marchant, and George-William Pratchett.[1]
Famous pre-war racers associated with FN include Kicken, Flintermann, Lovinfosse, Lempereur, Sbaiz, De Grady, René Milhoux, Charlier, Pol Demeuter, Noir, Van Gent, Renier, S "Ginger" Wood,
FN racing and competitions
1908 Isle of Man TT
In 1908, R O Clark of England took third place in the Multi-cylinder class.[7] He was well known for his early involvement in motorcycling events and distance records on FN motorcycles. He entered the 1909 TT but did not finish.[8]
1914 Isle of Man TT
Two FN fours were entered, by S B White and Rex Mundy, and they finished in 33rd and 36th place, respectively, from 103 starters, an hour slower than the winner, and an hour faster than the last rider to come in.[9] The bikes were of 500 cc, and not the production 748 cc, suggesting that they were specially constructed.[10]
See also
References
- The Illustrated Encyclopedia of Motorcycles New Burlington Books/Quarto Publishing, 1979^
- FN 1902-24 users.pandora.be, retrieved 2025-06-18^
- DK. Motorcycle Penguin, 2025-04-10^