The Aston Martin Vantage is a series of hand-built sports cars from the British automotive manufacturer Aston Martin. Aston Martin has previously used the "Vantage" name on high-performance variants of their existing GT models, notably on the Virage-based car of the 1990s. The modern car, in contrast, is the leanest and most agile car in Aston's lineup. As such, it is intended as a more focused model to reach out to potential buyers of cars such as the Porsche 911 as well as the exotic sports and GT cars with which Aston Martins traditionally compete.
Production of the V8 Vantage ended in 2017 while production of the V12 Vantage continued until 2018. The 2005 Vantage and its variants became the most successful model in Aston Martin's history. Aston Martin unveiled the next-generation Vantage in November 2017, and started its production run the following year.[8]
Overview
Following the unveiling of the AMV8 Vantage concept car in 2003 at the North American International Auto Show, the production version, known as the V8 Vantage was introduced at the Geneva Motor Show in 2005 for the 2006 model year. The two-seat, two-door coupé had a bonded aluminium structure for strength and lightness. The 172.5 in long car featured a hatchback-style tailgate for practicality, with a large luggage shelf behind the seats. In addition to the coupé, a convertible, known as the V8 Vantage Roadster, was introduced later in that year.[9]
The V8 Vantage was initially powered by a 4,280 cc quad-cam 32-valve V8 which produced 380 bhp at 7,300 rpm and 410 Nm at 5,000 rpm.[10] However, models produced after 2008 had a 4.7-litre V8 with 420 bhp and 470 Nm of torque.[11] Though based loosely on Jaguar's AJ-V8 engine architecture, this engine was unique to Aston Martin and featured race-style dry-sump lubrication, which enabled it to be mounted low in the chassis for an improved centre of gravity. The cylinder block and heads, crankshaft, connecting rods, pistons, camshafts, inlet and exhaust manifolds, lubrication system and engine management were all designed in house by Aston Martin and the engine was assembled by hand at the AM facility in Cologne, Germany, which also built the V12 engine for the DB9 and Vanquish.
The engine was front mid-mounted with a rear-mounted transaxle, giving a 49-51 front/rear weight distribution. Slotted Brembo brakes were also standard. The initial version of the V8 Vantage could accelerate from in 4.8 seconds before topping out at 175 mi/h.[12]
In 2008, Aston Martin introduced an aftermarket dealer approved upgrade package for power and handling of the 4.3-litre variants that maintained the warranty with the company. The power upgrade was called the V8 Vantage Power Upgrade, creating a more potent version of the Aston Martin 4.3-litre V8 engine with an increase in peak power of 20 bhp to 400 bhp while peak torque increased to 420 Nm. This consists of the fitting of the following revised components; manifold assembly (painted Crackle Black), valved air box, right and left-hand side vacuum hose assemblies, engine bay fuse box link lead (ECU to fuse box), throttle body to manifold gasket, intake manifold gasket, fuel injector to manifold seal and a manifold badge.
Aston Martin planned to build up to 3,000 per year. Included was a 6-speed manual transmission and leather-upholstery for the seats, dashboard, steering wheel, and shift-knob. A new 6-speed automated manual transmission, similar to those produced by Ferrari and Lamborghini, called Sportshift was introduced later as an option.
In their 2006 readership survey, readers of Car Design News voted the Aston Martin V8 Vantage as the best current production car design. The survey results were based on over 1,000 responses, most from working automotive designers and students of industrial and automotive design. The Vantage was also voted one of Automobile magazine's 2007 "All-Stars" for its performance, road manners, and design. The V8 Vantage is also one of the only two cars to be added to "The DB9 Section", – a mini-fridge reserved for the super "cool" – on the BBC's Top Gear (on which it is described as the baby Aston to differentiate it from the V12 powered DB9). The program rates cars from seriously un-cool to sub-zero. The fridge was an extra category added when the presenters deemed the Aston Martin DB9 too cool for the sub-zero category. In the 2005 awards, Jeremy Clarkson declared the V8 Vantage as Best Sounding Car of the Year and The Coolest Car of the Year, while the award winner was actually the Porsche 911.
While the V8 Vantage was never a common car, the success of the model is highlighted by the completion of chassis number 10,000 – a specially ordered Onyx coupé delivered to a customer in the USA – during the first half of 2008. While the production of 10,000 cars is a tiny number by the standards of typical car manufacturers, it was a significant milestone for an Aston Martin – the DB9 being the only other model to have achieved that number. By the end of production in 2017, Aston Martin had produced 15,417 V8 coupés, 6,231 V8 Roadsters, 2,551 V12 Coupés, and 465 V12 Roadsters (363 V12 S Roadsters, 101 V12 Roadsters and 1 V12 GT Roadster). While strong demand for the Vantage contributed to Aston Martin's health during this period, it is equally true that the relatively low production of all Aston Martins means seeing a V8 or V12 from this generation remains a rare treat. For perspective, during the same period, Porsche was producing over 20,000 911s annually and have built more than 1 million 911 variants in total.
Design credit for the original V8 Vantage has been disputed. The design is officially credited to Henrik Fisker, design director of Aston Martin at the time the Vantage was introduced. However, some sources, including Callum himself, claim that Ian Callum, director of design for Jaguar at the time and former director of design at Aston Martin, was responsible for creating a large amount of the design for the Vantage during his time at Aston Martin, before Fisker joined the company.[13] In an interview with Car and Driver, when asked how much of the V8 Vantage was completed under his watch, Callum replies "I would say a good 80 percent. In fact, we started the V-8 first and then shelved it while we did the DB9—that’s why they’re quite similar".[14] Since its launch in 2005, the Vantage series were offered with a wide range of personalisation options, particularly in the interior.[15]
2009 Update
In May 2008, Aston Martin announced new technological updates for the Vantage starting in the 2009 model year, which included changes to the engine, transmission, suspension and appearance. New cylinder liners that were now pressed into the aluminium block instead of the original cast-in variants allow a thinner liner, which in turn allows a larger capacity of 4.7-litre. The cylinder bore and stroke was increased from 89 mm to 91 mm and 86 mm to 91 mm respectively, giving a total displacement of 4,735 cc. The dry sump lubrication system was also modified.
The "Sportshift" automated manual transmission benefited from a software update, while a lightened flywheel was introduced for both the manual and the Sportshift versions. Aston Martin also stiffened the suspension and updated them to use Bilstein dampers. An optional sports pack was offered with stiffer springs for better handling and all-new 5-spoke alloy wheels. Sportshift-equipped models also received a new dual throttle mapping update which allows the driver to choose from the default sport mode or comfort mode, meant to provide more comfortable shifts and throttle input for drivability. Combined European fuel economy and emissions were also improved by 13%.[16]
New wheels were also part of the update including 20-spoke alloy wheels and new 5-spoke aluminium wheels for the sports pack. The interior changed slightly, using an updated console similar to the Aston Martin DBS and the DB9.
The update provided the Vantage with a power increase to 420 bhp at 7,000 rpm (an 11% increase) and a peak torque of 470 Nm at 5,750 rpm (a 15% increase), providing the car with additional reserves of mid-range performance.
V8 Vantage variants
Roadster (2006–2017)
At the 2006 Greater Los Angeles Auto Show, Aston Martin officially unveiled the V8 Vantage Roadster. With a kerb weight of 1710 kg the Roadster is 80 kg heavier than the coupé, but Aston Martin claimed both cars would have identical performance.[22] To compensate for the loss of the roof a new, super-stiff cross-member was added to the frame. The soft top could be raised or lowered electronically in 18 seconds and could be operated at speeds up to 30 mi/h. It had the same 4.3-litre V8 from the coupé version producing 380 bhp at 7,000 rpm and 302 lb·ft of torque at 5,000 rpm along with having a maximum speed of 175 mi/h. It would accelerate from 0 to 60 mi/h in 4.9 seconds.[23] The 2009 Vantage Roadster features swan wing doors, a leather and alcantara interior and a zinc alloy centre console and a crystal-capped key fob. It also featured the updated 4.7-litre V8 which produces 420 bhp and 470 Nm of torque, and can accelerate from 0 to 60 mi/h in 4.7 seconds before reaching a top speed of 180 mi/h.[24] When fitted with the Sportshift transmission, the Vantage Roadster accelerates from 0 to 60 mi/h in 4.9 seconds, and has a kerb weight of 1750 kg.
V12 Vantage variants
V12 Vantage / V12 Vantage Roadster (2009–2012)
On 11 December 2007, as part of Aston Martin's opening of their own design studio, the company unveiled a concept car based on the V8 Vantage. The car, known as the V12 Vantage RS, featured the AM11 V12 engine from the DBS and produced 510 bhp and 570 Nm of torque. The power along with the kerb weight of 1680 kg allows the car to accelerate from 0 to 62 mi/h in 4.2 seconds and achieve a top speed of 190 mi/h.[6][46]
Other additions include a new rear diffuser, a retractable rear-wing which can be raised or lowered, and carbon-ceramic brakes. The boot-lid and vented bonnet are also made from carbon-fibre to help decrease the car's weight. In early 2008, Aston Martin's CEO confirmed production of the V12 Vantage RS for mid-2009.[47]
Development prototypes of the V12 Vantage RS appeared in April 2008[48]
Motorsport
N24
During the 2006 British Motor Show in London, Aston Martin Racing revealed a near-stock version of the V8 Vantage that would compete in the Nürburgring 24 Hours endurance race. The car, now known as the V8 Vantage N24, was driven by Aston Martin CEO Dr. Ulrich Bez, development engineer Chris Porrit, development driver Wolfgang Schuhbauer and German journalist Horst Graf von Saurma-Jeltsch in the 24‑hour race. The car finished 4th in class and 24th overall, before being driven home on public roads after the race. While essentially much like the existing coupé, the N24 had a front splitter and extended door sills for aerodynamic efficiency, a full roll cage, a racing fuel tank, and other modifications necessary to make the car race-worthy. Other modifications include the removal of most of the interior, including all seats, replaced by a lone Recaro drivers' seat.
Later in 2006, Aston Martin confirmed that they would offer the V8 Vantage N24 to customers as a track car similar to a Porsche 911 GT3 Cup. The N24 specification complies with FIA GT4 European Cup, German VLN series, Grand-Am Cup, and various other national series' requirements.
The V8 Vantage N24 was featured in the BBC television series
External links
References
- Aston Martin V8 Vantage (2005 - 2017) – Aston's long-serving foil for the 911 Evo, 4 February 2025, retrieved 4 February 2025^
- Aston Martin AJ37 4.3 4.7 5.0 V8 DOHC engine Motor Car, retrieved 25 June 2023^
- James Howe. Aston Martin V12 engine tech guide